Plunge Cutting Grooving Bits

Plunge Cutting Grooving Bits
Plunge Cutting Grooving Bits

Refine Search

Show:
Sort By:

BEADING BIT BIT 5/16' X 3/8' PLUNGE CUTTING 1/2' SHANK

 Beading  router bit  Carbide  Tipped This particular beading bit is a plunge version. Also referred..

R 217.20

BEADING PLUNGE BIT 1/2 DIAMETER

 Beading  router bit  Carbide  Tipped This particular beading bit is a plunge version. Also referred..

R 229.85

CLASSICAL BIT 1/2' X 3/8' WITH TOP BEARING 1/4' SHANK

 Profile  router bits with plunge cut capability and top bearing  Classical Plunge Bitt Use this car..

R 394.04

CLASSICAL BIT 3/4' X 1/2' WITH TOP BEARING 1/4' SHANK

 Profile  router bits with plunge cut capability and top bearing  Classical Plunge Bitt Use this car..

R 490.44

CLASSICAL BIT PLUNGE CUTTING 1/2' X 3/8' (7/32' DIAMETER) 1/2' SHANK

 Profile  router bits with plunge cut capability  Classical  Plunge Bit Use this carbide tipped clas..

R 305.04

CLASSICAL PATTERN PLUNGE CUTTING 1/2' X 3/8' WITH TOP BEARING 1/4' SH

 Profile  router bits with plunge cut capability and top bearing  Classical Plunge Pattern Bit Use t..

R 344.57

CLASSICAL PATTERN PLUNGE CUTTING 3/4' X 7/16' WITH TOP BEARING 1/4' S

 Profile  router bits with plunge cut capability and top bearing  Classical Plunge Pattern Bit Use t..

R 531.87
CLASSICAL PATTERN PLUNGE CUTTING FLAT BOTTOM 1' X5/8'  1/4' SHANK Out Of Stock

CLASSICAL PATTERN PLUNGE CUTTING FLAT BOTTOM 1' X5/8' 1/4' SHANK

  Plunge  cut Classical Pattern router bit  This  plunge type decorative profile cutter will elimina..

R 459.70

CLASSICAL PATTERN PLUNGE CUTTING FLAT BOTTOM 1/2' X 3/8' 1/4' SHANK

 Plunge cut Classical Pattern router bit  This plunge type decorative profile cutter will eliminate ..

R 208.65

CLASSICAL PATTERN PLUNGE CUTTING FLAT BOTTOM 3/4' X 7/16' 1/4' SHANK

  Plunge  cut Classical Pattern router bit  This  plunge type decorative profile cutter will elimina..

R 370.74

CLASSICAL PLUNGE CUTTING 1' X 15/8' (7/32' DIAMETER) 1/2' SHANK

 Profile  router bits with plunge cut capability  Classical Plunge Bit Use this carbide tipped class..

R 440.03

CLASSICAL PLUNGE CUTTING 1' X 15/8' (7/32' DIAMETER) 1/4' SHANK

 Profile  router bits with plunge cut capability  Classical Plunge Bit Use this carbide tipped class..

R 532.01

CLASSICAL PLUNGE CUTTING 1' X 15/8' WITH TOP BEARING (7/32' DIAMETER)

 Profile  router bits with plunge cut capability and top bearing  Classical Plunge Bitt Use this car..

R 817.10

CLASSICAL PLUNGE CUTTING 1/2' X 3/8' (3/32' DIAMETER) 1/4' SHANK

 Profile  router bits with plunge cut capability  Classical Plunge Bit Use this carbide tipped class..

R 275.56

CLASSICAL PLUNGE CUTTING 3/4' X 1/2' (5/32' DIAMETER) 1/4' SHANK

 Profile  router bits with plunge cut capability  Classical Plunge Bit Use this carbide tipped class..

R 366.79

CLASSICAL PLUNGE CUTTING 3/4' X 1/2' WITH TOP BEARING (5/32' DIAMETER)

 Profile  router bits with plunge cut capability and top bearing  Classical Plunge Bitt Use this car..

R 609.48

CLASSICAL PLUNGE CUTTING 30MM 1/2' SHANK

 Profile  router bits with plunge cut capability  Classical Plunge Bit Use this carbide tipped class..

R 831.33

COMBINATION PANEL PILOT BIT 1/4' X 3/4' 1/4' SHANK

 Panel pilot bit  Carbide  Tipped  A  panel pilot bit has a pointed tip for plunge cuts and an integ..

R 174.24
CORE BOX 3/4' X 5/8' (3/8' RADIUS) 1/4' SHANK Out Of Stock

CORE BOX 3/4' X 5/8' (3/8' RADIUS) 1/4' SHANK

 Core  box router bit  Carbide  Tipped Pro-Tech offer eight sizes core box router bits. These bits c..

R 395.90

CORE BOX 5/8' X 1/2' (5/16' RADIUS) 1/2' SHANK

 Core  box router bit  Carbide  Tipped Pro-Tech offer eight sizes core box router bits. These bits c..

R 287.51

CORE BOX 7/8' X 1/2' SHANK

 Core  box router bit  Carbide  Tipped Pro-Tech offer eight sizes core box router bits. These bits c..

R 497.46
CORE BOX BIT 1/2' X 1/4'SH Out Of Stock

CORE BOX BIT 1/2' X 1/4'SH

 Core  box router bit  Carbide  Tipped Pro-Tech offer eight sizes core box router bits. These bits c..

R 223.62

CORE BOX BIT 1/4' X 1/4'SH

 Core  box router bit  Carbide  Tipped Pro-Tech offer eight sizes core box router bits. These bits c..

R 169.31

CORE BOX BIT 3/4' X 1/2'SH

 Core  box router bit  Carbide  Tipped Pro-Tech offer eight sizes core box router bits. These bits c..

R 418.27

CORE BOX BIT 3/8' X 1/4'SH

 Core  box router bit  Carbide  Tipped Pro-Tech offer eight sizes core box router bits. These bits c..

R 210.46
CORE BOX BIT 5/8' X 1/4'SH Out Of Stock

CORE BOX BIT 5/8' X 1/4'SH

 Core  box router bit  Carbide  Tipped Pro-Tech offer eight sizes core box router bits. These bits c..

R 301.60

COUNTERTOP TRIM 2 1/16' X 1/4' LENGTH 3 5/16' 1/2' SHANK

 Coutertop  trimming router bit  6  Wing Carbide  Tipped Create extra-smooth shallow recesses in cou..

R 1,050.99
FESTOOL DRILLING CUTTER HW S8 D8/19 491037 Out Of Stock

FESTOOL DRILLING CUTTER HW S8 D8/19 491037

Main applicationsFor cutouts of any kind - without pre-drilling, the drilling cutter goes right thro..

R 595.40
FESTOOL FLUTE CUTTER HW S12 D30/20/R15 491104 Out Of Stock

FESTOOL FLUTE CUTTER HW S12 D30/20/R15 491104

Main applicationsFor every flute cutter, Festool offers a roundover cutter with the same radiusItems..

R 1,802.20
FESTOOL FLUTE CUTTER HW S12 D40/25/R20 491105 Out Of Stock

FESTOOL FLUTE CUTTER HW S12 D40/25/R20 491105

Main applicationsFor every flute cutter, Festool offers a roundover cutter with the same radiusItems..

R 2,145.00
FESTOOL FLUTE CUTTER HW S8 R12,7 490987 Out Of Stock

FESTOOL FLUTE CUTTER HW S8 R12,7 490987

Main applicationsFor every flute cutter, Festool offers a roundover cutter with the same radiusFlute..

R 1,004.85

FESTOOL FLUTE CUTTER HW S8 R4 490983

Main applicationsFor every flute cutter, Festool offers a roundover cutter with the same radiusFlute..

R 656.45

FESTOOL FLUTE CUTTER HW S8 R6,35 490984

Main applicationsFor every flute cutter, Festool offers a roundover cutter with the same radiusFlute..

R 741.90
FESTOOL FLUTE CUTTER HW S8 R8 490985 Out Of Stock

FESTOOL FLUTE CUTTER HW S8 R8 490985

Main applicationsFor every flute cutter, Festool offers a roundover cutter with the same radiusFlute..

R 828.30

FESTOOL FLUTE CUTTER HW S8 R9,7 490986

Main applicationsFor every flute cutter, Festool offers a roundover cutter with the same radiusFlute..

R 893.10
FESTOOL OVOLO EDGE CUTTER HW S8 D17/R3 491004 Out Of Stock

FESTOOL OVOLO EDGE CUTTER HW S8 D17/R3 491004

Main applicationsFor decorative front design of inlaysWith partially ground standard blade suitable ..

R 1,060.30
FESTOOL OVOLO EDGE CUTTER HW S8 D19/R4 491005 Out Of Stock

FESTOOL OVOLO EDGE CUTTER HW S8 D19/R4 491005

Main applicationsFor decorative front design of inlaysWith partially ground standard blade suitable ..

R 1,430.90
FESTOOL OVOLO EDGE CUTTER HW S8 D21/R5 491006 Out Of Stock

FESTOOL OVOLO EDGE CUTTER HW S8 D21/R5 491006

Main applicationsFor decorative front design of inlaysWith partially ground standard blade suitable ..

R 1,507.30
FESTOOL OVOLO EDGE CUTTER HW S8 D23/R6 491007 Out Of Stock

FESTOOL OVOLO EDGE CUTTER HW S8 D23/R6 491007

Main applicationsFor decorative front design of inlaysWith partially ground standard blade suitable ..

R 1,186.10
FESTOOL OVOLO EDGE CUTTER HW S8 D27/R8 491008 Out Of Stock

FESTOOL OVOLO EDGE CUTTER HW S8 D27/R8 491008

Main applicationsFor decorative front design of inlaysWith partially ground standard blade suitable ..

R 1,634.60
FESTOOL PLANE CUTTER HW D 52/R1SS S12 492701 Out Of Stock

FESTOOL PLANE CUTTER HW D 52/R1SS S12 492701

Main applicationsUsing the facing cutter, jutting edges can be trimmed flush without any problem, e...

R 2,034.15
FESTOOL PLANE CUTTER S8 HW OFK 500368 Out Of Stock

FESTOOL PLANE CUTTER S8 HW OFK 500368

Main applicationsFor routing edges at 0-45°For routing branch knots and adhesive beadsItems Included..

R 1,852.90

FESTOOL PLASTERBOARD V-GROOVE CUTTER HW S8 D12,5/45 491000

Main applicationsPlasterboards can easily be cut at 45° or 90° angles using the plasterboard panel r..

R 989.85
FESTOOL PLASTERBOARD V-GROOVE CUTTER HW S8 D32/90  491001 Out Of Stock

FESTOOL PLASTERBOARD V-GROOVE CUTTER HW S8 D32/90 491001

Main applicationsPlasterboards can easily be cut at 45° or 90° angles using the plasterboard panel r..

R 1,302.60

FESTOOL PROFILE CUTTER HW S8 D19/R5/R4 491032

Main applicationsProfile cutter for routing profiled inlays or cassette fillingsItems Includedin sel..

R 1,186.10
FESTOOL ROUND NOSE CUTTER HW S8 R5 490981 Out Of Stock

FESTOOL ROUND NOSE CUTTER HW S8 R5 490981

Main applicationsRouting with copying rings: because of the long working length, curved or round wat..

R 1,468.80
FESTOOL ROUND NOSE CUTTER HW S8 R6,4 KL 490982 Out Of Stock

FESTOOL ROUND NOSE CUTTER HW S8 R6,4 KL 490982

Main applicationsRouting without copying rings: curved or round water channels can be routed using t..

R 1,751.50
FESTOOL SCRIPT CUTTER HS S8 D11/60  491002 Out Of Stock

FESTOOL SCRIPT CUTTER HS S8 D11/60 491002

Main applicationsA fine-grained wood is suggested for script cutting because the power tool can then..

R 797.30
FESTOOL SCRIPT CUTTER HW S8 D11/60  491003 Out Of Stock

FESTOOL SCRIPT CUTTER HW S8 D11/60 491003

Main applicationsA fine-grained wood is suggested for script cutting because the power tool can then..

R 989.85
FESTOOL STEPPED CUTTER HW D16,3/12,3/9,3 S12 492713 Out Of Stock

FESTOOL STEPPED CUTTER HW D16,3/12,3/9,3 S12 492713

Main applicationsParticularly suited for cutting edges during window constructionThe step cutter can..

R 2,069.85